STAIR TREADS

The Eurotred® step is the product of a detailed study of the problems associated with access ladders. Its self-supporting structure, corrosion resistant characteristics, and special non-slip surface ensure a product which solves any safety problems around your stairways. Even when slippery liquids such as water, oil and grease are present, the steps ensure the safe transit of personnel.

All the stair treads are available in self-extinguishing, polyester, isophthalic and vinilester resins and can have concave surfaces, with quartz or covered.
Our standard colours are green or grey with yellow nosing; alternatively, the stair tread can be grey with black nosing.
Modules with different sizes, colours and resins are manufactured on request.

TECHNICAL CHARACTERISTICS OF STAIR TREADS 8x8 h30
Stair Tread Mesh:	8 x 8 h 30
Dimensions (mm):	307 x 3000

MECHANICAL RESISTANCE TABLE - VALUES WITH CONCENTRATED LOAD
The table shows deflection in mm with concentrated load in daN
8 x 8 h 30		80 daN	120 daN	160 daN
Span (mm):	600	1.35	2.28	3.05
	800	3.60	5.50	7.01
	1000	6.80	10.00	13.50
	1200	10.80	17.80	23.50
The load values given in the table are average values and may vary by ±15%. Although these values are given in good faith and based our our experience, we do not know or have control over actual conditions of use and for this reason they cannot be a guarantee of performance.

TECHNICAL CHARACTERISTICS OF STAIR TREADS 19x19 h40
Stair Tread Mesh:	19 x 19 h 40
Dimensions (mm):	307 x 2000 307 x 4000

MECHANICAL RESISTANCE TABLE - VALUES WITH CONCENTRATED LOAD
The table shows deflection in mm with concentrated load in daN
19 x 19 h 40		80 daN	120 daN	160 daN
Span (mm):	600	0.54	1.18	1.62
	800	1.71	2.70	3.70
	1000	3.60	5.50	7.60
	1200	6.10	9.30	11.60
The load values given in the table are average values and may vary by ±15%. Although these values are given in good faith and based our our experience, we do not know or have control over actual conditions of use and for this reason they cannot be a guarantee of performance.

TECHNICAL CHARACTERISTICS OF STAIR TREADS 40 x 40 h38
Stair Tread Mesh:	40 x 40 h 38
Dimensions (mm):	290 x 2000 290 x 3000 290 x 4000

MECHANICAL RESISTANCE TABLE - VALUES WITH CONCENTRATED LOAD
The table shows deflection in mm with concentrated load in daN
40 x 40 h 38		80 daN	120 daN	160 daN
Span (mm):	600	0.85	1.45	1.90
	800	2.25	3.35	4.55
	1000	4.40	6.50	8.80
	1200	7.30	11.30	15.00
The load values given in the table are average values and may vary by ±15%. Although these values are given in good faith and based our our experience, we do not know or have control over actual conditions of use and for this reason they cannot be a guarantee of performance.

For a personalised estimate, contact Ticomm & Promaco at this email address or fill in our online form.